|
|
LIMITED TIME ITEMS
The following items are available in very limited quantities, while supplies last. If you are ordering needles, please make sure that these needles will fit your machine/application as they ARE NOT returnable. |
| |
|
S206x13 Needle System
CANU: 21:32 2
206x13
SY 2029
HPx13
Flat shank needles for Singer Rotary Hook Model 206, 306K, 306W, 319K, 319W, 320 Sewing Machines. Needles are sold in bundles of 100 only (10 packs x 10 needles each). When ordering please specify the number of bundles, not the total number of needles (i.e., quantity of 2 = 200 needles). Free shipping in the continental United States.
PLEASE NOTE: Limited quantity available. Availability subject to change without notice.
|
|
|
|
| |
|
16x231 Industrial Needles, Size 60, 5 Pack
New, Old Stock.
SCHMETZ
Round Shank
287 WH/1738
Size 60/8
This is a 16x231 needle. The packaging reflects the old designation. This is old stock that was found sitting in the warehouse. Size 60/8. Has a round shank. Please make sure that this will fit your industrial sewing machine. Five (5) needles per plastic cartridge. While supplies last. Limited Time Items are not returnable. Free shipping in the continental United States!
|
|
|
|
| |
|
16x231 Industrial Needles, Size 60, 10 Pack
New, Old Stock.
SCHMETZ
Round Shank
287 WH/1738
Size 60/8
This is a 16x231 needle. The packaging reflects the old designation. This is old stock that was found sitting in the warehouse. Size 60/8. Has a round shank (image looks flat due to magnifying feature on the clear plastic cover). Please make sure that this will fit your industrial sewing machine. Ten (10) needles per plastic cartridge. While supplies last. Limited Time Items are not returnable. Free shipping in the continental United States!
|
|
|
|
| |
|
Open Toe Embroidery Foot
This clear plastic foot has an open space between the front sides of the foot. It allows greater visibility when doing decorative stitching. It also has a channel on the base of the foot to allow better flow of finished decorative work. Available in high, low, slant, and snap-on shank. Limited Quantites - While Supplies Last!
|
|
|
|
| |
|
Fringe Foot - FT002-L
Use a zigzag and a narrow stitch length. The center bar will add length to the stitches to create dimension on the project. Create loopy fringe or cut it for straight fringe. To create permanency, stitch at edge or apply seam sealant on back of project. Low shank only. Limited Quantites - While Supplies Last!
|
|
|
|
| |
|
Edge Joining Foot - FT004-L
Join fabrics and trim edge to edge without a seam to create beautiful heirloom sewing results. Use a tiny zigzag or other decorative bridging stitch and thread to match inserted trim. Center of foot helps guide edges. Low shank only. Limited Quantites - While Supplies Last!
|
|
|
|
| |
|
Pintuck 5-Groove Foot - FT005-L
Used to sew raised tucks on light to medium weight fabrics. use 2.0 twin needle. Tucks are formed by twin needle sewing fabric tunnels into the groove under the foot. Place finished tuck into outside groove to guide the next tuck. Low shank only. Limited Quantites - While Supplies Last!
|
|
|
|
| |
|
1/8" Double Welt Foot
Used to make trim — trim upholstery, home decorating projects. Purchase ⅛" cord. Cut bias strips wide enough to wrap around two cords side-by-side and seam allowance. Place foot over two cords and stitch in center of cords. Move foot so that left groove is over right cord. Stitch to secure right cording. Available in low and slant shank. Limited Quantites - While Supplies Last!
|
|
|
|
| |
|
1/4" Hemmer Foot - FT010-L
For turning and sewing a 1/4" wide hem. Hand turn the hem 1/4" wide for about an inch. Sew it in place 4-5 inches. Raise foot and pull threads and fabric to the back — do not cut threads. Hold threads in left hand and fabric in right hand and feed edge into the spiral part of the foot. Lower the foot and continue sewing, letting the spiral turn the edge as it is being sewn. Low shank only. Limited Quantites - While Supplies Last!
|
|
|
|
| |
|
Felling Foot
Perfect for making flat fell, or shirt seams and hems. Construction of foot guide fabric to fold under as it passes under presser foot. Available in low and slant shank. Limited Quantites - While Supplies Last!
|
|
|
|
|
|
|
