|
|
CARDED FEET
Each high-quality foot is packaged in either a plastic clam-shell package or plastic bag. Includes directions for use. |
| |
|
Open Toe Embroidery Foot
This clear plastic foot has an open space between the front sides of the foot. It allows greater visibility when doing decorative stitching. It also has a channel on the base of the foot to allow better flow of finished decorative work. Available in high, low, slant, and snap-on shank.
|
|
|
|
| |
|
Fringe Foot - FT002-L
Use a zigzag and a narrow stitch length. The center bar will add length to the stitches to create dimension on the project. Create loopy fringe or cut it for straight fringe. To create permanency, stitch at edge or apply seam sealant on back of project. Low shank only.
|
|
|
|
| |
|
Edge Joining Foot - FT004-L
Join fabrics and trim edge to edge without a seam to create beautiful heirloom sewing results. Use a tiny zigzag or other decorative bridging stitch and thread to match inserted trim. Center of foot helps guide edges. Low shank only.
|
|
|
|
| |
|
Pintuck 5-Groove Foot - FT005-L
Used to sew raised tucks on light to medium weight fabrics. use 2.0 twin needle. Tucks are formed by twin needle sewing fabric tunnels into the groove under the foot. Place finished tuck into outside groove to guide the next tuck. Low shank only.
|
|
|
|
| |
|
Multi Cord Foot - FT006-L
Set machine to zigzag or other wide-width decorative stitch. thread five or less decorative threads through holes in and under foot. With decorative threads under foot, stitch to couch these threads under foot allowing ease in couching. Low shank only.
|
|
|
|
| |
|
1/8" Double Welt Foot
Used to make trim — trim upholstery, home decorating projects. Purchase ⅛" cord. Cut bias strips wide enough to wrap around two cords side-by-side and seam allowance. Place foot over two cords and stitch in center of cords. Move foot so that left groove is over right cord. Stitch to secure right cording. Available in low and slant shank.
|
|
|
|
| |
|
1/4" Hemmer Foot - FT010-L
For turning and sewing a 1/4" wide hem. Hand turn the hem 1/4" wide for about an inch. Sew it in place 4-5 inches. Raise foot and pull threads and fabric to the back — do not cut threads. Hold threads in left hand and fabric in right hand and feed edge into the spiral part of the foot. Lower the foot and continue sewing, letting the spiral turn the edge as it is being sewn. Low shank only.
|
|
|
|
| |
|
Felling Foot
Perfect for making flat fell, or shirt seams and hems. Construction of foot guide fabric to fold under as it passes under presser foot. Available in low and slant shank.
|
|
|
|
| |
|
Beading Foot - FT012-L
Place strung beads under channel in foot. Zigzag stitch width should be enough to clear beads. Beads appear to float on fabric when sewn with invisible thread. Low shank only.
|
|
|
|
| |
|
Overedge Foot
Used for fabric edges that pucker or curl. Use small zigzag stitch width with the needle sewing on and off the edge of the fabric. Available in high and low shank.
|
|
|
|
|
|
|
